Docomo F-02E Arrows X Instruction Manual page 143

It may take a time to acquire image data or broadcasted data
when you activate 1Seg or change channels due to
characteristic of digital broadcasting.
Depending on the airwave condition, video images or sounds
may be interrupted or stopped.
Video can be played back using the video correction engine
by marking [Video correction]. P98
Since 1Seg content is prohibited from copying, capturing
watching content is not available.
❖
1Seg screen
a
b
c
d
e
1Seg watching screen
a TV image area
Tap to switch the remote control screen to be shown/
hidden.
Flick left or right to start channel selection.
Touch and hold to fix/release screen orientation.
b Subtitle area
Touch and hold to fix/release screen orientation.
c Data broadcasting area
d Operation buttons for data broadcasting
f
e
Remote controller screen
e Navigation bar
f Switching channels
Touch and hold to start channel search.
When unregistered broadcasting station is found by the
channel search,
[
the channel list.
g Channel, broadcast station name, program name
h Program guide
Tap to check the program information.
Touch and hold to start timer setting for recording
programs/watching. P142
i Tuning button
g
j Recording button
h
P143
k Volume adjustment bar
Drag left and right to adjust volume.
SD : Adjust volume.
i
SD (1 sec. or more) : Switch channels.
✔INFORMATION
j
Since the screen view turns to full screen mode when the
k
terminal turns sideways, navigation bar shown at the bottom
of the screen in vertical screen mode does not appear in the
horizontal screen mode. Tap the screen to show navigation
bar at the right of the screen. When navigation bar is shown,
tap again to show the remote control screen or touch and
hold the screen to fix screen orientation/free fixed screen.
Deactivating 1Seg
1
On the 1Seg watching screen,
(Exit)]
141
[ (Channel list)]
(Add channel)] [ (Yes)] to add to
[
Applications