Docomo F-02E Arrows X Instruction Manual page 135

3
Mark [Android Beam]
Android Beam becomes available.
❖
Transferring content on the screen
You can transfer content shown on the screen such as
websites and maps, only by holding
other's terminal.
1
Activate each other's Android Beam function
2
Show website, map, etc. to transfer on the
sender's terminal
3
Hold mark over each other's terminal
When the terminal detects a compatible device,
notification sounds. The screen content on the sender's
terminal is zoomed out and "Touch to beam" appears.
4
Tap the screen content to transfer
The content shown on the sender's terminal is transferred
and appears on the receiver's screen.
mark over each
133
Notes when holding the terminal over
a card reader, NFC module equipped
device, etc.
Be careful not to hit the terminal when holding
over a compatible device.
Hold mark horizontally over the center of the compatible
device.
Slowly put the terminal close to a compatible device when
holding mark.
If mark cannot be scanned even with it held in front of
the center of the scanner, slightly lift up the terminal, or
move it backwards/forwards or to the left/right. When
holding the terminal to the scanner, note that
in the center of the terminal, but near the camera.
mark sometimes cannot be scanned if there is a metal
object between the mark and a compatible device. Also,
note that putting the terminal in a case or covering the
terminal might affect communication performance.
mark
mark is not
Applications