Homescreen Selector; Turning Power On/Off - Docomo F-02E Arrows X Instruction Manual

Charging with a PC
If you connect the terminal with a PC using a USB Cable for PC
connection T01 (optional), you can charge the terminal with a
PC.
When a screen of new hardware detection or operation
selection appears on the PC, select "

Turning power ON/OFF

Turning power ON
Press and hold X (2 sec. or more) until the
1
indicator LED lights green
The terminal vibrates and the lock screen appears
following the startup screen.
2
On the lock screen,
Lock screen P49
Turning power ON for the first time
After setting up Google account and Setting my body
( P113), make initial setting of docomo service. Follow the
onscreen instructions.
When a software update confirmation screen appears, tap
[OK].
When the instruction guide appears, tap [Do not show this
again] or [OK].
Changing the Home application
[docomo Palette UI] is set in the Home screen for the first
activation. To change to [NX!Home] etc., from the Home
screen,
application to switch to from [Homescreen selector].
(Cancel)". Turning power OFF
Press and hold X until the phone options menu
1
appears
2
[Power off] [OK]
The terminal turns off vibrating.
Basic operation
Using touch panel
You can operate the terminal by directly touching with your
finger.
Set whether to vibrate when tapping is recognized (Distinct
touch
35
[Settings] [Display] Select a home
P94).
Before using the terminal