Character Entry - Docomo F-02E Arrows X Instruction Manual

❖
Flick
Touch the screen and sweep the finger quickly.
Switching the portrait/landscape view
The terminal supports a motion sensor that senses orientation
or motion of the terminal. You can switch display view by
tilting the terminal vertical or horizontal (Auto-rotate screen
P97).
Even when you change the orientation of the terminal, the
screen may not change depending on the screen displayed.
Hold the terminal with your hands and shake it 2 times or
more, then the terminal returns and fixes to portrait view
from landscape view changed by auto-rotate (Shake to
unrotate P98).
Screenshot
You can save a screen displayed on the terminal as an image.
Some screens may not be saved.
Press X and D (1 sec. or more)
1
To check the image, open the Notification panel and tap a
notification for screenshot, or from the Application menu,
tap [Gallery] [Screenshot].

Character entry

Enter characters using software keyboard displayed on the
screen.
Entering characters with NX!input is mainly described in
this section.
Switching to other input method is available. P42
You can connect an external keyboard to enter characters.
P44
Using keypad
You can enter characters using numeric keypad, QWERTY
keypad or handwritten input.
You can activate voice input from each keypad. P41
When Overwrite handwritten input is valid in Handwritten
input setting of keyboard settings, handwritten input is
available with the numeric or QWERTY keypad displayed.
Overwrite handwritten input is enabled by default. P42
Numeric keypad
Several characters are assigned to a key. 3 types of input
methods can be used : Flick input, Numeric keypad input,
Gesture input. P39
a
b
37
c
Before using the terminal