Docomo F-02E Arrows X Instruction Manual page 17

Do not place the terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation,
causing internal corrosion and malfunction.
When using, be careful not to subject excessive force to the
terminal or the battery.
- If the terminal is crammed into a brimming bag or placed
in a pocket and sat on, display, internal PCBs or battery
pack may be damaged or malfunction. And, if external
devices are plugged into the external connection jack or
the stereo earphone jack, the breakage of the connector or
malfunction may result.
Do not rub or scrape the display with a metal piece etc.
- May scratch the display, causing malfunction or damage.
Carefully read the separate instructions that come with
optional devices.
The terminal
Do not press the surface of the touch panel strongly or
operate it with sharp objects such as a nail, a ballpoint pen
and a pin.
- It may damage the touch panel.
Avoid extreme temperature.
- Use the terminal where the temperature ranges between 5
and 40 (limited to the temporary use in a bathroom etc.
when temperature is above 36 ) and humidity ranges
between 45 and 85%.
The terminal may affect land-line phones, TVs or radios in
use nearby, so use it as far as possible from these
appliances.
Maintain a separate record of the data you saved in the
terminal.
- If the data is deleted, DOCOMO assumes no responsibility
for the loss of any data.
Do not drop the terminal or subject it to shocks.
- May cause malfunction or damage.
Do not plug external devices into the external connection
jack or stereo earphone jack at a slant, or do not pull it
forcibly while it is plugged.
- May cause malfunction or damage.
It is normal for the terminal to become warm during use or
charging. Continue to use it.
Do not leave the terminal with the camera in areas under
strong direct sunlight.
- May cause discoloring or burn-in of elements.
Use the terminal with the external connection jack cap
closed.
- Dust and/or water brought into the terminal cause
troubles.
Do not use the terminal with the back cover removed.
- May cause removal of battery pack, malfunction or
damage.
Do not give a strong impact on the fingerprint sensor or
scratch the surface.
- It may cause not only malfunction of the fingerprint sensor
but also disabling authentication.
Clean the fingerprint sensor with a dry soft cloth (such as a
cloth for eyeglasses).
- When the fingerprint sensor is dirty or gets wet on the
surface, it cannot read the fingerprint and may cause
decrease the authentication performance or erroneous
operation.
15
Contents/Precautions