Docomo F-02E Arrows X Instruction Manual page 185

When updating software, your private information
concerning F-02E (model, serial number, etc.) is
automatically sent to the server for software update
managed by DOCOMO. DOCOMO does not use the sent
information for purposes except software update.
When software update has failed, the terminal may not
activate or [Update failed] appears and all operations may
become unavailable. In that case, please bring the terminal
to DOCOMO-specified repair office.
When PIN code is set, the PIN code entry screen appears
during resetting after rewriting and you need to enter PIN
code.
While updating software, do not activate other applications.
Updating software automatically
Update file is automatically downloaded and software is
updated at the specified time.
❖
Automatic update setting
The settings of Software Update is set to [Automatic Update]
by default.
1
From the Home screen,
[About phone] [Software Update]
[Configure the software update]
2
[Automatic Update]/[Manual Update]
❖
If the update file is downloaded automatically,
update available) appears on the status bar to notify.
1
2
[Settings]
183
When software update is necessary
When the rewrite start time is reached with
update available) displayed, software is automatically
rewritten and (software update available) disappears.
Open the Notification panel and tap the
notification
Software update notice screen appears.
Rewrite notice screen
Perform target operations
Closing confirmation : [OK]
Return to the Home screen. Updating starts when the
preset time is reached.
Changing preset time :
For reserved update P184 "Reserving software update"
Rewriting immediately :
For updating immediately
immediately"
(software
(software
[Set Time]
[Start update]
P184 "Updating software
Appendix/Index