Docomo F-02E Arrows X Instruction Manual page 138

Broadcast wave and service area
The radio wave received via Mobacas differs from that of
received via Xi/FOMA service and 1Seg. For this reason, the
signal cannot be received at places where the Mobacas
broadcast does not reach or while broadcasting is out of
service, regardless of whether the terminal is outside or inside
the Xi/FOMA service area.
Also, in the following places, the signal status may become
weak or the signal may not be received even if the terminal is
inside the area of Mobacas broadcasting service.
Places that are far from the base station that sends signal
Places where the signal is disrupted due to the landscaper or
structures such as mountain areas or behind buildings
Places where the signal is weak or does not reach, such as
tunnels, basements, or places inside buildings
When displaying on the TV by MHL connection, the signal
status may become weak or the signal may not be received
even if the terminal is inside the area of Mobacas
broadcasting service.
TV antenna
When you watch Mobacas or 1Seg, TV antenna receives
signal.
Pull out the TV antenna thoroughly to the end.
To change direction of the TV antenna, hold the root part
around the TV antenna. Do not perform forcibly.
To house the TV antenna, hold the root part of the TV
antenna and pull in until it stops. Do not pull in with holding
the top part of the TV antenna.
136
Applications