Docomo F-02E Arrows X Instruction Manual page 168

Charging
Use the FOMA AC Adapter 01 for Global use (optional), FOMA
AC Adapter 02 (optional), AC Adapter 03 (optional), AC
Adapter 04 (optional) or AC Adapter F05 (optional) when you
charge the battery overseas.
Usage charge
Overseas usage charges (call and packet communication)
differ from those in Japan.
Since some applications automatically perform
communications, packet communication charges may
become high. For operation of applications, contact the
application provider by yourself.
Advance preparation
Setting network service
If you subscribe to network services, you can use network
services such as Voice Mail Service, Call Forwarding Service,
Caller ID request service, etc., even overseas. Some network
services are not available.
To use network services overseas, you need to set Remote
access to activate. You can set Remote access in the country
you visit.
Even if the setting/canceling operation is available, some
network services cannot be used depending on overseas
network operators.
After arriving overseas
When you arrive overseas and turn the terminal ON, a
connection to the available network is established
automatically.
Connectivity
When you have set [Network operators] in [Mobile networks]
to [Select automatically], optimum network is automatically
selected.
When you use a network operator of a country/region covered
by the flat-rate service, you can use the service with flat-rate
packet communication charges overseas up to the specified
upper limit per day. To use this service, subscription of packet
flat-rate service in Japan is required. For details, refer to
"Mobile Phone User's Guide [International Services]" or
DOCOMO International Services website.
Display
During international roaming, [R] appears on the upper left
on the signal status icon. The terminal works in a 3G network
and GSM/GPRS network service area. Also, it works in
countries or districts where 3G 850 MHz/GSM 850 MHz is
applied.
You can confirm the name of the connected network
operator on the Notification panel.
Date & time
When [Automatic date & time]/[Automatic time zone] in [Date
& time] is marked, the date, time and time differences of the
terminal are corrected by receiving information related to time
and time differences from the network of overseas
telecommunications carrier you connect to.
Correction of the time or time differences may not be
performed correctly depending on the network of overseas
network operator. In that case, set time zone manually.
Timing of correction varies by the overseas network
operator.
"Date & time" P117
166
International roaming