Handling Precautions - Docomo F-02E Arrows X Instruction Manual

Part
Charging terminal
Battery Pack Body
F28
Label
Contacts
Desktop Holder F36
Part
Holder case
Lever
Rubber part
Contact spring
External connection jack
Material/Surface treatment
LCP resin Stainless steel/Gold
plating
PC resin
PET/Black printed letter
Copper/Gold plating
Material/Surface treatment
ABS resin
POM resin
Silicone rubber
Phosphor bronze/Gold plating
Stainless steel/Tin plating

Handling precautions

General
F-02E is waterproof/dustproof, however, do not allow
water or dust to seep into the terminal and do not allow
accessories or optional devices to get wet or attached with
dust.
- Battery pack, adapter, desktop holder, docomo mini UIM
card are not waterproof/dustproof. Do not use in a
bathroom or other highly humid area or do not let rain
touch. Or putting the terminal on your body, humidity of
sweat may cause internal corrosion and malfunction. Note
that malfunctions, which are determined to be caused by
water as result of inspections, are not covered by the
warranty. Since these conditions are outside the scope of
the warranty, a repair, if at all possible, is charged.
Clean the terminal with a dry soft cloth (such as a cloth for
eyeglasses).
- Rubbing it roughly with a dry cloth may scratch the
display.
- Drops of water or dirt left on the display may cause stains.
- If the terminal is wiped with alcohol, paint thinner, benzine
or detergent, the printing may disappear or color may
fade.
Clean the jack occasionally with a dry cotton swab etc.
- If the jack is soiled, connection gets worse and it may
cause power to be turned off or insufficient battery charge,
so clean the jack with a dry cotton swab etc.
Also, be careful never to damage the jack when cleaning it.
14
Contents/Precautions