IBM Network Color Printer Administrator's Manual page 63

Choosing TCP/IP Setup Options
Enable TCP/IP Notes
Select YES to enable and configure
YES (default) TCP/IP on the printer.
NO
IP Address
Enter an IP Notes
address for the
• Use the Menu Scrolling push buttons
printer.
to enter each character of the IP
address exactly.
• Obtain the IP address from the AIX
or TCP/IP administrator for your site.
Subnet Mask
255.0.0.0 Notes
(default)
• If your network uses a subnet mask,
use the Menu scrolling push buttons
Leave default
to enter each character exactly.
or enter a
• If your network does not use a
selection.
subnet mask, leave the default of
255.0.0.0
• Obtain the subnet mask from the AIX
or TCP/IP administrator for your site.
Gateway Address
Leave blank or Notes
enter a
• If your network uses gateways, use
selection.
the Menu Scrolling push buttons to
enter each character of the gateway
address exactly.
• If your network does not use
gateways, leave blank.
• Obtain the gateway address from the
AIX or TCP/IP administrator for your
site.
The following table summarizes TCP/IP network setup options and their
network and operating system implications.
Table 8: Network Setup Options and Client/Server Implications: TCP/IP
Windows NT
Select YES if you will use TCP/IP to
connect an NT server or workstation to
the printer.
TCP/IP
You must select YES for TCP/IP printing.
Chapter 6. Configuring the IBM Network Color Printer
6–23