IBM Network Color Printer Administrator's Manual page 50

Paper Source
Tray1 (default)
Tray2
Auxiliary Tray
Auto Select
Paper Size
Letter (default)
Legal
A4
B5
6–10
Administrator's Guide
the job, the job will print with the settings you choose here. These defaults
also apply to most jobs sent with the
specify most of these options.
Table 2: Printer Setup Options and Client/server Implications
Notes
• Tray 1 is the first tray
under the printer at
the front.
• Tray 2 is the optional
tray that goes under
Tray 1. You only
have this tray if you
purchased the
option.
• The Auxiliary Tray is
the fold-out tray on
the right side of the
printer. This is the
only tray that can
use transparencies
and thicker bond
paper.
• Auto Select means
that the printer
draws from Tray 1
while there is paper
in it. When Tray 1
runs out, the printer
switches to Tray 2 if
Tray 2 contains the
same size of paper
until Tray 1 again
has paper of the
needed size.
Notes
Set the default paper
size.
For transparencies, you
can only choose Letter
or A4.
command, as this command cannot
lpr
AppleTalk
Users can override this
default from the
PostScript printer driver
window.
NetWare
Users can override this
default from the
PostScript printer driver
window.
AppleTalk
Users can override this
default from the
PostScript printer driver
window.
NetWare
Users can override this
default from the
PostScript printer driver
window.
Windows NT
Users can override this
default from the
PostScript printer driver
window.
TCP/IP users
Most jobs will use the
default you set here.
Windows NT
Users can override this
default from the
PostScript printer driver
window.
TCP/IP
Most jobs will use the
default you set here.