Hardware Assembly; Stack Arrangement Example - VersaLogic EPM-14 Cougar Reference Manual

Physical Details
H A
ARDWARE SSEMBLY
The EPM-14 uses PC/104 and PC/104-Plus connectors so that expansion modules can be added
to the top of the stack. PC/104 (ISA) modules must not be positioned between the EPM-14 and
any PC/104-Plus (PCI) modules on the stack.
The entire assembly can sit on a table top or be secured to a base plate. When bolting the unit
down, make sure to secure all four standoffs to the mounting surface to prevent circuit board
flexing. Standoffs are secured to the top circuit board using four pan head screws. Standoffs and
screws are available as part number VL-HDW-101.
An extractor tool is available (part number VL-HDW-201) to separate the PC/104 modules from
the stack. Use caution when using the extractor tool not to damage any board components.
S A E
TACK RRANGEMENT XAMPLE
Figure 8. Stack Arrangement Example
14
EPM-14 Reference Manual