The isolator should be placed at the entrance to the room or stairs.
•
You can place the Space Isolator in position to stop the cleaner passing
•
through.
Be sure to remove any obstacles from the area around the Space Isolator
•
that may block the signals, which will affect its blocking performance.
The Space Isolator should be placed at the same level of ground where
•
the vacuum is working.
You should check whether the vacuum can pass the Space Isolator before
•
walking away and leaving it to work.
The distance between the Space Isolator and the Charging Dock should
•
be more than 3 metres, otherwise there will be interference between
them.
The Docking Station should not be installed within the signal scope of the
•
Space Isolator.
13
Need help?
Do you have a question about the KAVACROBVWA and is the answer not in the manual?