Kogan KAVACROBVWA User Manual page 13

The space isolator will block areas by sending out an infrared signal, which will
prevent the vacuum from entering the areas.
Toggle Switch You can switch the functionality by sliding the toggle switch
Signal Head
Near-infrared
Transmitting
Head
Open the battery cover before use, then place 2 x D batteries (not
•
included) into the battery compartment correctly, making sure the
polarities match up.
Battery consumption duration is related to the selected transmitting
•
distance and working duration. When possible, use the low distance
setting to save the battery power, and don't forget to turn the unit off
when the vacuum is not being used.
between off, low, middle and high.
Off: unit will be off
•
Low: Will keep vacuum a distance of 4m away
•
Middle: Will keep vacuum a distance of 6m away
•
High: Will keep vacuum a distance of 8m away
•
Projects a beam that the vacuum will not travel through.
Projects a radial region around the unit that the vacuum will
not travel into or through.
1. Toggle Switch
2. Signal Head
3. Near-infrared Transmitting Head
4. Power Indicator
12