Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan SmarterHome LX12
Summary of Contents for Kogan SmarterHome LX12
- Page 1 KOGAN SMARTERHOME™ LX12 ROBOT VACUUM WITH MOPPING FUNCTION KAVACRBL12A...
-
Page 2: Table Of Contents
Safety & Warnings Overview Installation Connect to Smarterhome Google Home Control Amazon Alexa Control Operation Cleaning & Care Troubleshooting Specifications... -
Page 3: Safety & Warnings
SAFETY & WARNINGS • This product is intended for floor cleaning use only in the home environment. Do not use it outdoors (such as open balcony), non-ground surface (such as sofas), commercial or industrial environments. • Do not use in a suspended environment (such as a duplex flat, open balcony, top of home) without a protective fence. - Page 4 • If the power wire is broken or snapped, cease use immediately and contact help.Kogan.com for support. • If you need to transport the product, ensure the machine is turned off and packed back into the original package if possible.
-
Page 5: Overview
OVERVIEW Charging button • Short press to activate the charging function. Cleaning/Power button • Short press to activate the cleaning function. • Long press to power on or off. Partial cleaning button • Short press to activate partial cleaning. Wi-Fi Pairing/Reset •... - Page 6 Laser distance sensor Speaker Infrared charger Infrared wall sensor/Infrared anti- sensor/charger collision sensor sensor Collision sensor Laser head cover Laser head cover pressure sensor Infrared wall sensor/charger Dust box sensor Dust box release Vent outlet Charging electrode Universal wheel Cliff sensor Side brush Driving wheel Rolling brush...
- Page 7 Dust box module Always ensure the filter screen is installed before use. Dust box fastener Cleaning tool Dust box Dust box upper bracket Dust box filter screen Dust box lower bracket Dust box slipcover Release button...
- Page 8 Mopping module Water tank Water tank cover Mop securing pads Water tank filter Water tank wheel Water tank fastener...
- Page 9 Charging base Charging base indicator Signal emission zone Charging contact pins Front Power port Rear Power adapter...
- Page 10 Accessories Water Tank Disposable Mop (x10)
-
Page 11: Installation
INSTALLATION Place the charging base on a flat surface against a wall Against the wall Not against the wall Ensure that there is more than 1.2 meters clear space in front and more than 0.5 meters clear space on both sides of the charging base. - Page 12 Long press the power button to switch the unit on. Press the charging key, and the machine will find the charging base automatically for charging. The colour of the power button indicates the remaining charge of the battery: • White light: Power >15% •...
-
Page 13: Connect To Smarterhome App
Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page. - Page 14 Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (the power button indicator may be flashing slowly). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the Partial Cleaning and Charging buttons until the power button indicator flashes slowly.
- Page 15 Select “AP Mode” for the set-up type. Ensure that the device is in pairing mode, with the light flashing, and tap “Confirm light is slowly flashing”. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
- Page 16 10. Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly.
- Page 17 Having trouble connecting? The prior steps detail the process for “AP Mode” connection. If that does not work for your connection, we suggest trying it again, and if still no success, attempting the following method for Standard (non-AP Mode) connection. Add device through network Once registered, tap “+”...
- Page 18 Notes: • The device and the app have to use the same Wi-Fi network. • The device is only compatible with 2.4Ghz networks. If both Standard and AP Mode methods aren’t successful, please contact help.kogan.com for assistance.
-
Page 19: Google Home Control
From the home page of the Google Home app, select the “+” icon to access the ‘Add and manage’ page. Select ‘Set up device’, then under the Works with Google banner, select ‘Have something already set up?’ Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service. - Page 20 Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 21 Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
-
Page 22: Amazon Alexa Control
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding “SmarterHome” to the Alexa app From the home page of the Alexa app, select the “ ” icon in the top-right and select Skills &... - Page 23 Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 24 SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands. Note: Please note that Alexa can only control the base/core functions of any compatible SmarterHome™...
-
Page 25: Operation
OPERATION Power on/off • Long press the power button to switch the unit on. The indicator on the power button turns on slowly and the vacuum enters the standby state. • When the machine is stationary, long press the power button to switch the unit off. The white light slowly turns off and the vacuum will power off. - Page 26 Mopping Switch to the water tank assembly for mopping. Notes: • Do not use the mopping function when nobody is home. • If some rooms in your home are carpeted, set these as restricted areas using the app. 1. Moisten the mop pad and attach it to the underside of the water tank. 2.
- Page 27 3. Insert the water tank assembly back into the vacuum. The water tank will ‘click’ indicating it has been installed correctly. 4. Short press the power button or start mopping using the app. Note: When charging or not using the vacuum, remove the water tank. Pour out any remaining water and clean the mop to avoid mildew or odours developing.
- Page 28 Cleaning mode After cleaning starts, the machine will scan the room, generate a map, and zone the room intelligently. During zone cleaning, it will firstly clean along the wall, plan the sweeping path and then clean each zone one by one in a zig-zag pattern, covering all zones in an efficient manner.
- Page 29 Partial cleaning When the machine is on standby or paused, press the Partial cleaning button to start partial cleaning mode. This mode is used to clean a 1.6m x 1.6m square area. After cleaning, the machine will automatically return to the starting position and stop. 1.6m Note: Starting partial cleaning when in pause mode will end the last cleaning cycle and...
- Page 30 Sleep mode If there is no user input for more than 20 minutes, the vacuum will enter sleep mode automatically. In sleep mode, after the breathing light dims, the machine can be activated by pressing any button. Note: The machine will not enter sleep mode when charging on the charging base. When entering low battery during sleep mode, the machine will automatically shut down.
-
Page 31: Cleaning & Care
CLEANING & CARE Main brush (weekly cleaning recommended) Turn over the machine, press down the fastener and remove the main brush cover. Take the main brush out and clean the main brush bearing. Cut any tangled hair from the main brush with the cleaning tool as shown on the next page. - Page 32 Using the cleaning tool...
- Page 33 Side brush (weekly cleaning recommended) Use a screwdriver to unscrew and clean the side brushes. Note: It is recommended to replace the side brushes every 3-6 months to ensure optimal cleaning. Battery The vacuum has a built-in high-performance rechargeable lithium battery pack. To maintain optimal battery performance, keep the machine in the charging dock for daily use.
- Page 34 Dust box and filter screen (weekly cleaning recommended) Press the release button and remove the dust box. Open the dust box lid. Empty the dust box.
- Page 35 Open the dust box cover and remove the mesh cover and HEPA filter screen. Shake debris off the filter and gently brush it using the cleaning tool. Note: It is recommended to replace the filter every 3-6 weeks.
- Page 36 Fill the dust box with clean water, close and shake it, then pour out the water inside. Repeat this step several times until the dust box is clean. Note: Ensure the dust box is thoroughly dried before re-installing it. Water tank and mop (cleaning after every use is recommended) Press the release button and remove the water tank assembly.
- Page 37 Remove the mop from the bottom of the water tank. Clean the map and allow it air dry before next use. Note: It is recommended to replace the mop every 6-12 months. Water tank filter element (replacement every 1-3 months is recommended) Remove the mop to gain access to the filter elements.
- Page 38 Machine sensor Wipe the sensors of the machine with a soft and dry cloth, including: The four cliff sensors at the bottom of the machine. The wall sensor on the right side of the machine. The charging electrode at the bottom of the machine. The infrared charger sensor.
- Page 39 Charging base (monthly cleaning recommended) Wipe the charging clip with a soft and dry cloth. Firmware update • The firmware of the machine can be upgraded using the app. Place the vacuum on the charging base and ensure that the battery is more than 15% before upgrading. •...
-
Page 40: Troubleshooting
TROUBLESHOOTING When abnormalities occur in the operation of the machine, the power button indicator flashes orange quickly and a voice prompt will sound. Refer to the table below for troubleshooting. Voice prompt Resolution If the laser distance sensor is covered or “Please check if the radar is covered jammed by foreign matter, remove the and move the machine to a new... -
Page 41: Faq
Problem Solution • The battery is low, charge it before resuming operation. Vacuum will not turn on • Ambient temperature is too low (less than 0°C) or too high (higher than 50°C). • There are too many obstacles near the charging stand. - Page 42 • Wi-Fi signal is insufficient, ensure the vacuum is in a good Wi-Fi signal coverage area • Unable to connect to Wi-Fi Wi-Fi connection is abnormal, reset Wi-Fi and download the latest version of the app and try connecting again. Manually recharging or putting the vacuum back Vacuum not breakpoint onto the charging stand will cause the vacuum to...
-
Page 43: Specifications
SPECIFICATIONS Vacuum Name Parameter External size 350 x 350 x 98mm Battery type 5200mAh Product weight ~3.6kg Rated voltage 14.4V Rated power Charging base Name Parameter External size 145 x 140 x 99mm Rated power Rated input 24V - 1.2A Rated output 24V - 1.2A... - Page 44 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...