Covers - Permobil Chairman Operator's Manual

Covers

Covers
Removal
1. Raise the seat to its highest position.
2. First remove the rear battery cover, which is
fitted with two handles on each side.
Disassembly is facilitated if the brake release
lever is moved to the forward position.
3. Remove the rear cover, it is attached by five
screws. Unscrew the rubber pads on the seat
support. Disconnect the rear light cable at the
connector in the cable.
4. Remove the seat lift cover, which is fitted with
two plastic plugs on the upper side of
the chassis.
5. Remove the front battery cover, which is
secured by two screws on the upper side of
the chassis.
6. Remove the front cover, it is attached by two
screws on the front edge.
Fitting
Fitting is the reverse procedure.
A
C
D
E
Fig. 6. Chassis cover attachment points.
A. Front cover
B. Seat elevator cover
C. Front battery cover
D. Rear battery cover
E. Rear cover
Fig. 7. The front cover is attached by two
screws at the front edge.
8
B