Drive Motors - Permobil Chairman Operator's Manual

Drive motor
Removal
1. Raise the seat to its highest position.
2. Switch the main power breaker off.
3. Put the circuit breaker in the "OFF" position,
see fig. 22.
4. Remove the battery cover and front cover,
see page 8.
5. Remove the battery on the side concerned,
see page 9, to facilitate removal of the motor.
6. Raise the relevant side of the chair on blocks.
7. Remove the wheel, see page 10.
8. Disconnect the electrical connectors to the
motor and magnetic brake, see fig. 23.
9. Pull the cable sleeve forwards and take the
cable out through the slot in the cable mounting.
Unhook the brake release cable from the
magnetic brake, see fig. 24.
Fig. 22. Circuit breaker/Battery isolator.
Fig. 23. Magnetic brake and drive motor
electrical connectors.
Fig. 24. Magnetic brake release cable.
15
Drive motor
Off
On