Permobil Chairman Operator's Manual page 14

Magnetic brakes
4. Insert a bolt to align the parts. Note the position
of the brake release arm; fit the brake so that it is
aligned with motor's cable mounting. Secure the
magnetic brake using the three bolts.
5. Connect the magnetic
connector, see fig. 20.
6. Fit the brake release cable, see fig. 21.
7. Fit the batteries, see page 9.
8. Fit the covers, see page 8.
9. Put the circuit breaker in the "ON" position,
see page 23.
brake electrical
14
Fig. 19. Align the parts with one another using
one of the fixing bolts.
Fig. 20. Magnetic brake electrical connector.
Fig. 21. Magnetic brake release cable.