Seat Lift Cables - Permobil Chairman Operator's Manual

Seat lift cable
Seat lift cable
Removing
1. Remove the seat lift; follow the instructions on
page 18.
2. Remove the seat lift sensors. Note the position
of the sensors for refitting, see fig. 32-33.
Fitting
Fitting is the reverse procedure.
NB! After fitting, check that the arm of the Lever
switch can move freely.
1. Screw
2. Lever switch plate
3. Lever switch
4. Insulating plate
5. Seat lift
6. Plate
7. Nut
Fig. 32. Attachment of the
sensors to the seat lift.
1 2 3
Fig. 33. Attachment of the
sensors to the seat lift.
18
2 4 5 6 7