Covers - Permobil Chairman 2k Service Manual

Covers

Covers
Detachment
1. Run the seat up to its uppermost position.
See page 7 for instructions to manually raise
the seat.
2. First remove the seat lift cover. It is mounted
with four plastic plugs which can be flipped up
using a screwdriver.
3. Unscrew the knob at the far back of the
chassis cover, see fig. 7.
4. Push the cover back and lift it up at the
same time.
5. Loosen the three screws that are holding the
front fender on each side, see fig. 8.
NB! The front fender can be detached without
dismounting the chassis covers.
Mounting
Mounting is performed in reverse order.
Fig. 6. The seat lift cover is mounted with four
Fig. 7. The chassis cover is fastened with a knob.
Fig. 8. The side cover is mounted
with three screws.
8
plastic plugs.