Drive Motors - Permobil Koala Service Manual

Drive motor
Drive motor
Removal
1. Raise the seat to its highest position. To
operate the seat lift manually, see page 7.
2. Switch off the main switch on the control panel.
3. Put the circuit breaker to the "OFF" position,
see fig. 30.
4. Remove the battery cover and chassis cover,
see page 8.
5. Disconnect the drive motor and magnetic
brake electrical connectors, see fig. 31.
6. Pull the cable sleeve forwards and take the
cable out through the slot in the cable mounting.
Unhook the brake release cable from the
magnetic brake, see fig. 32.
Fig. 30. Circuit breaker, 63A (Off-On).
Fig. 31. Disconnect the electrical connectors.
Fig. 32. Disconnect the brake release cable.
16