Log Placement - Vermont Castings BLDV300N SC7SB Installation And Operating Instructions Manual

BLDV7 Series Gas Fireplace

LOG PLACEMENT

1. Place the rear log (#1) in place by sliding it over the
rear pins on the right and the left.
Step 1 - Rear Log (#1)
2. Place the right front log (#3) over the burner and grate
LG530
by matching the hole on the bottom of the log with
BLDV rear log
the pin on the burner. Also match the cut-out on the
8/08
bottom of the log with the bars on the grate. NOTE:
When this log is in place pull towards the front.
Step 2 - Right Front Log (#3)
3. Place the left front log (#5) over the burner and grate
LG530
by matching the holes on the bottom of the log with
BLDV rear log
the pin on the burner. Also match the cut-out on the
8/08
bottom of the log with bars on the grate. NOTE: When
this log is in place the branch on this log will lay over
the rear log on the left. Pull log forward.
Step 3 - Left Front Log (#5)
32
LG532
BLDV Lt front log
4. Place the right upper log (#2) at an angle toward
the burner by matching the rectangular notch on the
bottom of this log with the rectangular protrusion on
the right front log (#3). The burned side of this log will
point toward the burner.
Step 4 - Right Upper Log (#2)
5. Place the left upper log (#6) at an angle by matching
the rectangular notch on the bottom of this log with
the rectangular protrusion on the side of the left front
LG533
log (#5). The split end should point toward the front.
BLDV rt upper log
Step 5 - Left Upper Log (#6)
8/08
6. Place the small twig (#4) by having the small pointed
end of the log toward the front of the fireplace and
the fat end resting evenly with the pointed ends of the
right and left front logs. Also, the notch on this log will
match the middle tong on the grate.
LG534
Lt upper log
Step 6 - Small Twig (#4)
8/08
LG534
BLDV small twig
FINAL INSTALLATION
20306741