Glass Frame Removal - Vermont Castings BLDV300N SC7SB Installation And Operating Instructions Manual

BLDV7 Series Gas Fireplace

GLASS FRAME REMOVAL

NOTE: I f the safety barrier is in place, you must first remove
it before you remove the glass frame. To remove
the barrier, simply lift up and pull out until the tabs
are clear of their corresponding slots on the fire-
box. Then proceed to remove the glass frame by
following the steps below.
1. Remove access panel by lifting up and out.
2. Release two clamps (500 model has three clamps) on
bottom of fireplace. Figure 32
3. Tilt glass frame out and lift glass frame up until it clears
three tabs on top of fireplace.
4. Set glass frame aside.
Each clamp has a quick spring force. When
reinstalling clamps, keep fingers clear.
Safety Screen
Barrier
Figure 32 -
Remove Glass Frame
24
Glass Frame
FIREPLACE INSTALLATION
DANGER
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
DANGER
Une barrière visant à réduire le risque de brûlure
par le hublot chaude est fournie avec cet
appareil et doit être installé.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Un panneau vitré chaud peut
causer des brûlures.
Laissez refroidir le panneau
vitré avant d'y toucher.
Ne laisser jamais les enfants
toucher le panneau vitré.
20306741