Crankcase
1. Thoroughly wash the contact face of crankcase
with a sort of hot solvent.
2. Thoroughly wash the matching faces of sealing
gasket and crankcase with a sort of hot solvent.
3. Check
Crankcase
Crack or damage
Oil hole
Blockage
Blow out with compressed air
Bearing and oil seal
1. Check
Bearing
Clean and lubricate, whirl the inner race with a finger.
Unevenness
Replace
Note
Must not dry them by blow in compressed air, or can
lead to a damage of the bearing face.
2. Check
Oil sealing
Damage or wear
Circlip and washer
1. Check
Circlip
Washer
Damage, loosen, bend
82
Replace
Replace
Replace
ENGINE