Crankshaft And Counterbalance; Rocker Arm And Camshaft - Jianshe JS125-6B Maintenance Manual

Crankshaft and counterbalance

1. Disassemble
Counterbalance
Crankshaft
Disassemble them with a crankshaft remover
Note
Tighten the strutting bolt of the separating tool, but
make sure that the tool shell is perpendicular to the
crankshaft. If necessary, one screw can be turned
back a little to calibrate the state of the stool shell.

Rocker arm and camshaft

1. Disassemble
Lock pressure plate
2. Disassemble
Camshaft (with bearing
Note
The camshaft is disassembled with bolt of 8mm 3
3.Disassemble
. Rocker arm shaft
.Rocker arm
Note
The rocker arm shaft is disassembled with the slide
hammer bolt and the weight
Slide hammer bolt
64
ENGINE
)
.
Weight
.