PERIODIC INSPECTION AND ADJUSTMENT
Disassemble and install the seat
cushion, oil tank and cover types
Disassemble
1. Disassemble the side cover (left)
Open
with a key
Pull out the fixed pin of side cover (serial number
)
Take out the side cover on the direction of the arrow
(serial number
) points.
2. Disassemble the side cover (right)
Take out the bolt (serial number
driver
Pull out the fixed pin of side cover (serial number
)
Take out the side cover on the direction of the
arrow (serial number
3. Disassemble the seat cushion
Take out the bolts (see the left figure), one on the
left and right sides.
28
) with screw-
) points.