8. Adjustment
Alignment mark of the push rod
crankcase
Loosen the nut
thoroughly
Turn the push rod
until
aligns with
Lock the nut after adjusting.
9. Install
Gasket (new)
Right case cover
Mounting torque of the case cover:
10. Install
Kick-starting rod
Mounting torque of the kick-starting rod:
101
, turn the push rod anticlockwise
right and left for adjusting
.
Lock torque of the nut:
0.8kgf.m(8N.m)
1.0kgf.m(10 N.m)
5.0kgf.m(50 N.m)
ENGINE
and the