Table of Contents
Advertisement
CABLE AND ELECTRIC APPLIANCE SYSTEM
Remove
1.Remove
Starting motor wire
Starting motor assy
Discharge
1.Before discharge, sign some marks on the front and
rear brockets, so that it can easy to check.
2.Remove
Front brocket
Washer
Rear brocket
3.Remove
Armature
magnetic yoke
Brush
Inspection and repairment
1. Check:
Commutator
Dirt
Polish with 600# sand paper
2. Measure:
Diameter of commutator
Wear limit of commutator: 21mm
Out of specification
3. Measure:
Depth of mica sheet undercut
Depth of mica sheet undercut:
Out of specification
saw blade to make meet specification.
Note
In order to ensure the normal work of commutator ,
the isolation mica sheet of commutator must have
undercut.
175
Replace starting motor
1.5mm
Repair mica sheet with hand-
Hide quick links:
Advertisement
Table of Contents
