Jianshe JS125-6B Maintenance Manual page 181

3. Starter motor
Connect the binding pole of the battery with the cable
of starter motor with crossbond as shown in the
figure.
Check if the starter motor works normally.
4. Starter relay
Disassemble the socket connectors of the start
Connect the storage battery with the cable strat
electric relay with cross-bond as shown in the figure.
Check if the starter relay functions normally
Run
starter relay
Run
171
CABLE AND ELECTRIC APPLIANCE SYSTEM
Warning
The cross-bond should have an equel or more capacivity
than the wire of the storage battery, otherwise the
cross-bond will be fused.
Error spark may occur in the inspection, inflame gas
or liquid should be kept away from the around area.
The starter motor is faulty and should be checked
or replaced.
The starter relay is fault and should be replaced
Faulty
Faulty work