PERIODIC INSPECTION AND ADJUSTMENT
Check front fork
1. Place the machine in a level place
2. Check
Front fork vertical rod
Scratch or damage
Oil seal
Serious leakage
3. Maintain the machine in vertical position, catching
the front brake.
4. Check
Operation
Slide the front fork up and down several times.
Stuck
Repair
Refer to
Front fork
Adjust rear shock absorber
Warning
Must adjust each absorber's preloaded values to
uniform set value to avoid worsening operability and
reducing stability.
Support the machine firmly to prevent it from turn
over.
1. Adjust
Spring preload
Turn adjusting advice
Turn to the direction
value is increased.
Turn to the direction
value is decreased.
Standard:3 Min :1 Max :5
Caution
The adjusting advice mustn't turn to a minimum
position or a maximum position.
47
Replace
Replace
in chapter 6
to the direction
The spring preloaded
The spring preloaded
Adjusting advice:
or
.