Rotor and starting mechanism
1. Check
Check the gear condition
1 and 2.
Burr, Scraps, out-of-flatness, wear
2. Check
Starting gear 2 (contact surface)
Pit corrosion, wear, damage
******************************************
Check steps
Install the starter gear in the clutch of the starter, and
hold the clutch.
When turn the starter gear clockwise , the clutch
of the starter mesh with its gear, or the clutch of the
starter goes wrong and be replaced.
When turn the starter gear anticlockwise
clutch gear of the starter should be turned freely, or
the clutch of the starter goes wrong and be replaced.
******************************************
Chain guide plate and idle gear
1. Install
Timing chain
Chain guide plate
Note
First, the timing chain must be installed, and then the
guide plate is fixed.
2. Install
Starting idle gear
Pressure plate
103
ENGINE
of starting gear
Replace
Replace
Mounting torque
1.0kgf.m(10 N.m)
Mounting torque
0.7kgf.m(7N.m)
, the