Table of Contents
Advertisement
Troubleshooting
Inspection steps
1. Storage battery
2. Fuse
3. Starter motor
4. Main switch
Note
The following parts should be disassembled before
troubleshooting
Side cover
Seat
The following special tools should be used to trouble-
shoot
Small-size multimeter
1.Protecting Device
Disassemble the protecting device
Connect a small size multimeter (
protecting pipe
Check if the protecting pipe is powered on
2. Storage battery
Check the storage battery condition
Please refer to the part III of
Voltage: 12.5V
Specific gravity of elecrolyte: 1.280,20
Starter motor doesn't run
1) to the
electrification
Storage battery
Normal
170
CABLE AND ELECTRIC APPLIANCE SYSTEM
5. Starter relay
6. Starter switch
7. Neutral switch
8 Clutch switch
The fuse has blown
Refill distilled water
Clear the binding pole of storage battery
Charge the battery or replace it
No electrification
Abnormal
Hide quick links:
Advertisement
Table of Contents
