9) System Control Unit – MKS-8010B
The system control unit to be configured with the CCP-6224/6324 should be the MKS-8010B which is
a successor model of MKS-8010A. The MKS-8010A will be discontinued and replaced by the MKS-
8010B; this unit will also be supported by MVS-8000 and DVS-9000 series switchers.
The menu display terminal (ANALOG VGA RGB 15pin D-SUB) is a new feature provided with the MKS-
8010B, this differs from the MKS-8010A as it allows a commonly available external VGA monitor to
be used to display the menu. Therefore, the existing menu panel, MKS-8011A is not always required
for the MKS-8010B.
On the other hand, the EXT3 terminal which is less frequently used is removed from the MKS-8010B;
however, it has two terminals of VGA outputs, the menu display terminal for the operation without
the MKS-8011A and also the EXT display terminal for GUI of the plug-in editor. The MKS-8010B also
allows for redundant power supply units via an optional PSU.
See the following examples for panel configuration.
P a g e