to the keyers as standard. In the initial software version, 2D is supported. However, in the future
version, 2.5D is planned to be supported on the resizer.
6) 2ch of Internal 3D DME Option
With the MKS-6470 (optional), video effects such as 2CH of 3D transformation, defocus, mosaic,
drop shadow, lighting, recursive etc. are available, which is the same effects of the MVE-8000A but
excluding the non-linear effects, page turn and sparkle.
7) Combination with MVE-8000A/MVE-9000
If customers require specialized effects such as page turn and sparkle for post production etc., it can
be realized by connecting a MVE-8000A or MVE-9000 via SDI. The dedicated MVS-Interface found
on the MVS-8000 series is not available. When using the external DME it is not possible to perform a
DME wipe. The external DME channels are CH5, 6, 7 and 8.
8) Compact and Comfortable Operation
When using the new CCP-6000 series control panels a dedicated AUX bus module is not required.
This is supported as the AUX bus can be controlled on the M/E row, with a button allowing the row
to switch between operating M/E and AUX. This functionality is not supported on the CCP-8000
Customers can also use the existing CCP-8000 and CCP-9000 panels with the MVS-6000. These
choices allow flexible operation and the range of control surfaces can be selected to best suite the
customers' needs. If customers are already familiar with the MVS-8000 or DVS-9000 series control
panels they can select the same panel type to allow operators to quickly move between systems and
to provide additional redundancy within their facilities.
The new CCP-6000 series panels allow the AUX bus module to be included in the M/E row
This AUX mode is only available for the new panel configuration (CCP-6224/6324)
P a g e