Submenu "Serial Port #3; Submenu "Serial Port #4 - Raytheon STD 21 GPS Operation Manual

3.5.2

Submenu "Serial Port #3"

After entering submenu "Serial Port #3", the following display is shown:
(Note: from "GPS Setup", press and hold "Set" for 5--10 seconds to enter this submenu)
Figure 52: Submenu "Serial Port #3"
"Port Disabled"
"Course Bus"
"NMEA 0183" and "No header"
"NMEA 0183" and "Header GP"
"NMEA 0183" and "Header HE"
"Fast NMEA" and "No header"
"Fast NMEA" and "Header GP"
"Fast NMEA" and "Header HE"
See also section 4.4.2.
A selected item is designated with a " √ " in the rectangle.
Edition: Feb. 23, 2009
Satellite Compass
STD 21 GPS
Serial Port #3
Port Disabled
Course Bus
NMEA 0183
Fast NMEA
No header
Header GP
Header HE
Select
Exit
Dim
up
√
Dim
down
Set
= No data output at port #3
= Anschütz specific data format
= NMEA Data format, only "Heading true" data
output, update rate 1sec. (see section 4.4)
= NMEA Data format, "Heading true" data output
with a source information: generated by GPS,
update rate 1sec. (see section 4.4)
= NMEA Data format,"Heading true" data output
with a source information: generated (simulated)
by a Gyro Compass, update rate 1sec.
(see section 4.4)
= NMEA Data format, only "Heading true" data
output, update rate 20 msec.
= NMEA Data format, "Heading true" data output
with a source information: generated by GPS,
update rate 20 msec.
= NMEA Data format,"Heading true" data output
with a source information: generated (simulated)
by a Gyro Compass, update rate 20 msec.
63
STD 21 GPS
3717/110--850.DOC020002