Displays - Raytheon STD 21 GPS Operation Manual

2.3

Displays

2.3.1 Display "GPS Pos." (Basic Display)
This display is shown after finishing the initialization procedure.
This display shows heading in numerical form and position values (latitude and
longitude). The position is for information only.
Figure 8:
Soft Key
Select
Menu
GPS
Config.
GPS
Hdg.
Dim up
Dim down Brightness control / Contrast control
Lamp
Test
3717/110--850.DOC020002
Satellite Compass
GPS
Select
Menu 068.7°
HEADING
GPS
Config.
LAT: 054°21.164' N
GPS
LON: 010°08.220' E
Hdg.
WSG' 84
Display "GPS Pos." (Basic Display)
Meaning
Select additional menus to:
-- Check CAN Bus addresses
-- Check software version
-- Set volume
Select additional displays to evaluate satellite
information or constellation.
Select setup menu for:
-- The Antenna Unit and Processor Unit
installation positions
-- System Configuration
Select the display "GPS Hdg."
(Heading is displayed in large numbers)
Brightness control / Contrast control
Check the lamp, buzzer and brightness
STD 21 GPS
Dim
up
Contrast
Dim
down
Lamp
Test
12
refer to
section
see sections
2.3.8 and 2.3.9
see sections
2.3.6 and 2.3.7
see
section 3.5
see
section 2.3.2
see
section 2.2.1
see
section 2.2.1
see
section 2.2.2
Edition: Feb. 05, 2007