Safety Instructions And Mounting Recommendations - Raytheon STD 21 GPS Operation Manual

3.1

Safety instructions and mounting recommendations

3717/110--850.DOC020002
Satellite Compass
STD 21 GPS
Warning!
Use care during maintenance and repair to avoid contact with en-
ergized electrical conductors. Applicable safety regulations must
be followed, such as VDE, BGV A3, OSHA 1919, and other con-
sensus safety standards.
When establishing cable connections ensure that the cables are
disconnected from the power supply.
It is essential to ensure that all cables are disconnected from the
power supply, if necessary measure the voltage beforehand
and/or disconnect the relevant distributor.
Caution!
Maintenance and repair must be performed by trained and quali-
fied personnel who are knowledgeable in equipment safety re-
quirements!
Device may be damaged!
Exchange of spare parts, a subgroup or PCB when power is on
can cause severe damage to the equipment.
Observe precautions for handling electrostatic sensitive devices.
While connecting cables to the equipment, do not bend cables to
an acute angle, pinch, twist, or impart excessive force. Cracks or
damage to the cable coating can cause a fire or electric shock.
26
Edition: Feb. 05, 2007