Service - Raytheon STD 21 GPS Operation Manual

2.3.9

Service

The following instructions show how to display the addresses of the CAN bus
participants. This menu will also serve for service information/settings in the future.
Figure 19: Display "GPS Pos." (Basic display)
Start with the basic display (see Figure 19). Operate the soft key "Select Menu" to
display the following menu (see Figure 20).
Figure 20: Display to select "Panel Setup" and "Service" menus
With "Menu" selected in inverse, operate the soft key "Set" to display the display to
select between "Panel Setup" and "Service" (see Figure 21).
Return to the basic display "GPS Pos." by using "Select Menu" to select "Exit" and then
operating "Set", or automatically after approx. 10 seconds.
Edition: Feb. 05, 2007
Satellite Compass
STD 21 GPS
GPS
Select
068.7°
Menu
HEADING
GPS
Config.
LAT: 054°21.164' N
GPS
LON: 010°08.220' E
Hdg.
WSG' 84
GPS
Select
Menu 068.7°
HEADING
Menu
Exit
Dim
up
Contrast
Dim
down
Lamp
Test
Dim
up
Contrast
Dim
down
Set
21
STD 21 GPS
3717/110--850.DOC020002