Gps Setup - Raytheon STD 21 GPS Operation Manual

Procedure to leave "GPS Setup" with a changed configuration.
If a data format change has been made, operate the soft key "Set" and the display "GPS
Setup" is shown again with additional menu options to acknowledge the change or to
discard the setting.
Figure 53: Display "GPS Setup" after changes have been made in one of the submenus
To store the change, select "Store settings and restart system" with the soft key "Select"
and operate "Set". The STD 21 GPS will restart and, after the initialization and acquisi-
tion procedure, the display "GPS Pos." (Basic Display) is shown (see Figure 8).
Procedure to leave "GPS Setup" without a changed configuration.
Select "Exit" without performing a change in the submenu "Serial Port #3"
(see Figure 52), the display "GPS Setup" (without additional menu option) is shown
(see Figure 50) .
or
Select "Discard changes" with the soft key "Select" and operate "Set", then the
display "GPS Setup" is shown again (see Figure 50).
3717/110--850.DOC020002
Satellite Compass

GPS Setup

GPS
Pos.
Software Versions
Serial Port #3
Serial Port #4
Sat.
PU Mounting
Status
AU Alignment
Discard changes
Store settings
and restart system
Select
STD 21 GPS
Dim
up
Dim
down
Set
64
Edition: Feb. 05, 2007