Display "Gps Tape - Raytheon STD 21 GPS Operation Manual

2.3.3

Display "GPS Tape"

This display is selected by operating "GPS Tape" button in the display "GPS Hdg."
It displays heading in numerical form and also in tape form.
Figure 10: Display "GPS Tape"
Soft Key
GPS
Pos.
GPS
Config.
GPS
ROT
Dim up
Dim down Brightness control / Contrast control
Lamp
Test
3717/110--850.DOC020002
Satellite Compass
GPS
GPS
Pos. 180.0°
HEADING
GPS
Config.
180°
179°
GPS
ROT
Meaning
Select basic menu "GPS Pos."
(Heading information together with latitude and
longitude information)
Select additional displays to evaluate satellite
information or constellation.
Select a setup menu for:
-- Antenna Unit and Processor Unit installation
positions
-- System Configuration
Selection of the display "GPS ROT"
(Heading is displayed in normal numbers to-
gether with a numerical and graphical informa-
tion of Rate of Turn)
Brightness control / Contrast control
Check of lamp, buzzer and brightness
STD 21 GPS
Dim
up
Contrast
Dim
down
181°
Lamp
Test
14
refer to
section
see
section 2.3.1
see sections
2.3.6 and 2.3.7
see
section 3.5
see
section 2.3.4
see
section 2.2.1
see
section 2.2.1
see
section 2.2.2
Edition: Feb. 05, 2007