Setting The User Programs - Toshiba e-STUDIO161 Service Manual

2. Setting the user programs

1) Hold down the [Light] key (
( , , , , ) blink.
•"- -" appears in the display.
1 3 5
2) Enter the program number with the numeric keys.
•See "USER PROGRAMS" for the program numbers.
•The selected program number blinks.
•To select "Auto clear timer", press the [1] key.
Note:If you enter the wrong number, press the [CLEAR] key (
then enter the correct number.
3) Press the [START] key ( ).
•The selected program number stops blinking and lights steadily.
•The currently selected setting code blinks in the 1st digit of the
display.
START
4) Enter the desired setting code by pressing a numeric key.
•For the setting codes, see "USER PROGRAMS".
•The selected setting code blinks.
•To select 90 seconds, press the [5] key.
Note:If you enter the wrong number, press the [CLEAR] key (
return to step 2).
5) Press the [START] key ( ).
•The selected setting code stops blinking and lights steadily.
START
Note:To select a setting for another user program, press the [CLEAR]
key ( ) and then return o step 2).
6) Press the [Light] key ( ) to complete the settings.
•The alarm indicators ( ,
returns to the number of copies display.
e-STUDIO161 USER PROGRAMS
) until the alarm indicators
RE D END
, , , ) go off and the display
) and
) and
8-3