Product Outline; Specifications; Unpacking And Installation - Toshiba e-STUDIO161 Service Manual

[15] OPTION MR-2015 (ADF)

1. PRODUCT OUTLINE

This machine is a duplex document auto feeder attached to a digital
copier.
It feeds originals automatically to allow continuous copying.

2. SPECIFICATIONS

Model Name MR-2015
Document set direction Face up
Document set position Right/Center reference
Document transport Sheet through type
system
Document feed sequence Top take-up feed
Document size AB series: A3 ~ A5
Inch series: LD ~ ST
Document weight 56 ~ 90g/m
Document set quantity Max. 40 sheets (Stack range: within 4mm)
(90g/m
Dimensions 583mm (W) x 435mm (D) x 133mm (H)
Weight About 5.0 kg
Power source Supplied from the copier. (DC 24V, 5V)
Power consumption 21W
Document size detection On the document feed tray
Detection size Japan:
Inch series:
EX AB series: A3, B4, A4, A4R, A5, B5,
Mixture of different Mixture paper feed: Not available
document sizes
Random paper feed: Not available
Document reverse Not allowed
Display section (LED) None
S 3 S, 16 sheets/min (main unit:16ppm)
Document exchange
speed S 3 S, 20 sheets/min (main unit:20ppm)
MR-2015 OPTION MR-2015 (ADF)
2
, 15 ~ 24lbs
2
: Set capacity = 30 sheets)
A3, B4, A4, A4R, B5, B5R,
A5
LD, LG, LT, LT-R, ST
B5R, A5R

3. UNPACKING AND INSTALLATION

A. Unpacking
For unpacking, refer to the figure below.
B. Installation
Turn the main switch of the copier to the "OFF" position and then
remove the power plug of the copier from the outlet.
(1) Remove the document cover.
Lift the document cover from the copier and tilt it to the rear side to
remove it.
15 – 1