Toshiba e-STUDIO161 Service Manual page 105

(2) Remove the right cabinet.
Remove the five screws and remove the right cabinet.
(3) Remove the document glass and the right document
glass holder.
Remove the four screws, remove the document glass from the copier,
and then remove the right document glass holder.
(4) Attach the ADF glass holder.
Fit the ADF glass holder to the document glass.
Attach the document glass to the copier and fix it with the four screws.
MR-2015 OPTION MR-2015 (ADF)
(5) Attach the right cabinet.
Reattach the right cabinet to its original position and fix it with the five
screws.
(6) Cut out the cut-out portion.
Cut out the cut-out portion of the rear cabinet with nippers or the like.
At this time, be careful about the orientation of the nippers so that the
cut plane of the rear cabinet is flat.
(7) Attach the automatic document feeder.
Insert the hinge portions of the document feeder into the mounting por-
tions of the copier by holding the feeder at an angle toward the rear
side.
15 – 2