Toshiba e-STUDIO161 Service Manual page 77

4) Select "Serch for a suitable driver for my device" and press the NEXT
button.
5) Select "Specify a location" and press the NEXT button.
6) Specify the folder which includes the maintenance tool driver and
press the <OK> button.(Go to the procedure 8)
Press the <Browse> button, if not includes the maintenance tool
driver.
Specify the path of the folder in which the maintenance tool driver
(Mainte.inf) is included, and press <Open> button.
e-STUDIO161 FLASH ROM VERSION UPGRADE PROCEDURE
7) Check that the path to the folder which includes the maintenance tool
driver (Mainte.inf) is properly displayed, and press the NEXT button.
Create the "Maintenance Tool" folder in the C drive.
(When the driver (Mainte.inf) is included in the "C:\maintenance
Tool\Drivers\2kXP" folder:)
8) Press the NEXT button, and installation is started.
9) When installation is completed, the following display is shown.
Press the Finish button.
The installation procedure of the joint maintenance program on Windows
2000 is completed with the above operation.
12-4