Table of Contents
Advertisement
Quick Links
ComforTrak
Assembly Instructions
EP-560™ Inversion Tables
Pour télécharger et imprimer les instructions de
montage du dossier ComforTrak™ en français,
rendezvous sur teeter-inversion.com
Para descargar e imprimir las instrucciones
de montaje de ComforTrak™ en español, visite
5
teeter-inversion.com
FULL
YEAR
R
Series
TM
* Inversion Table images may
vary slightly from your model.
The EP-560 is shown here.
Advertisement
Table of Contents
Related Manuals for Teeter Hang Ups ComforTrak EP-560
Summary of Contents for Teeter Hang Ups ComforTrak EP-560
-
Page 1: Assembly Instructions
ComforTrak™ en français, rendezvous sur teeter-inversion.com Para descargar e imprimir las instrucciones de montaje de ComforTrak™ en español, visite teeter-inversion.com FULL YEAR * Inversion Table images may vary slightly from your model. The EP-560 is shown here. -
Page 2: Important Safety Instructions
BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table. Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity. IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE. WARNING WARNING - To reduce the risk of injury to persons: •... - Page 3 BEFORE YOU BEGIN: Review all steps before beginning assembly and read all precautions before using the inversion table. Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity. IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE. WARNING •...
-
Page 4: Items For Assembly
ITEMS FOR ASSEMBLY (Page 1 of 2) ITEM NAME ITEM NAME ITEM NUMBER ITEM NUMBER Stretch-and-Grip Base Assembly Front Ankle Bar Assembly A-Frame E61100 Front Ankle Bar EP1045 with two pre-assembled cups Angle Tether F51007 Front Ankle Bar Assembly Hardware Kit HK1004 pre-assembled to A-Frame Bolt (1), Nut (1), End Cap (1) - Page 5 ITEMS FOR ASSEMBLY (Page 2 of 2) Items not shown to scale. Hardware drawings located on the insert inside each Hardware Kit. Stretch-and-Grip Base Assembly Main Shaft T-Pin Ankle Lock System Stretch Assist Handle Assembly with with pre-assembled Angle Tether requires assemblies, below use Stretch Assist Handle Assembly Hardware Kit (HK1008)
-
Page 6: Understanding Your Inversion Table
UNDERSTANDING YOUR INVERSION TABLE Before reading further, study the drawing below to familiarize yourself with the important components of your new Teeter Hang Ups Inversion Table. ® Identifying Parts and Components Head Pillow Spreader Arms Located on back of table bed. - Page 7 Replace Labels and Owner’s Manual if Damaged, Illegible, or Removed. Teeter, 9902 162nd St. Ct. E., Puyallup, WA 98375 * Inversion Table images may Toll Free (Phone): 800-847-0143 Web: www.teeter-inversion.com EP-1737 0911-3 vary slightly from your model. The EP-560 is shown here.
-
Page 8: Before Beginning Assembly
BEFORE BEGINNING ASSEMBLY Unpack and Prepare Your Workspace • If possible, set up the product at or near the space in which you intend to use it to avoid moving it later. • Unpack all parts and support materials. Set aside packing materials and clear your work area. •... - Page 9 STEP 1 Stretch-and-Grip Base & Stretch Assist Handle Assembly Open the Stretch-and-Grip Base (“A-Frame”) FIGURE 1 • On a level surface, position the A-Frame so that it is standing upright and the Stability Feet are on the ground. RIGHT LEFT •...
- Page 10 STEP 2 Table Bed Assembly Assemble the Upper and Lower Portions of the Table Bed FIGURE 4 Bed Frame Extension NOTE: Do not detach the Bed Frame Extension from the clips. • Locate the Table Bed Assembly Hardware Kit (HK1006) •...
- Page 11 STEP 3 Roller Hinge Assembly FIGURE 7 FIGURE 8 WARNING Unlocked Locked NEVER disassemble the Roller Hinge Pivot Pin. Bracket Pin Pivot Pin Cam Lock Bracket • Familiarize yourself with the Roller Hinge and Cam Lock terms detailed below in Figure 7. FIGURE 9 FIGURE 10 •...
- Page 12 STEP 4 Attach the Table Bed to the A-Frame • Face the front of the A-Frame where the Crossbar is located (refer to Figure 12 to determine FIGURE 12 A-Frame Front). • Grasp both the Roller Hinges, right above the Cam Lock, and lift the Table Bed. Allow the top of the Table Bed to rotate toward the floor, so that the back of the Table Bed is now facing you and the top of the Table Bed is in front of the Crossbar (Figure 13).
- Page 13 EP-560: Complete Steps 5-7. FIGURE 16a EP-560 Sport: Complete these steps to use the T-Pin Ankle Lock System, or if using with the EZ-Up Gravity Boots, skip to Step 8. To assemble the Conversion Bar, refer to the additional instructions enclosed.
- Page 14 STEP 6 Rear Ankle Bar Assembly Assemble the Rear Ankle Bar onto the Main Shaft FIGURE 18 • Locate the Rear Ankle Bar Assembly Hardware Kit (HK1003). • With the two ridges of the pre-assembled Heel Cup on the bottom, insert the Rear Ankle Bar into the large hole at the back of the Main Shaft (Figure 18).
- Page 15 STEP 7 Front Ankle Bar Assembly Assemble the Front Ankle Bar onto the Main Shaft FIGURE 22 NOTE: Extending out from the Front Ankle Bar, you will see a temporary plastic zip-tie fastened to the loops of the Retainer Spring with Cable. This is provided to assist with the assembly process, detailed below.
- Page 16 STEP 8 Assemble the Main Shaft to the Table Bed • Facing the front of the A-Frame, hold the Main Shaft in your left hand with the height FIGURE 25 markings facing up. Slide the end of the Main Shaft into the Main Shaft Housing (Figure 25), located at the base of the Table Bed.
-
Page 17: Misassembly Check
MISASSEMBLY CHECK WARNING If your Teeter Hang Ups Inversion Table looks like either of these images, your inversion table has been misassembled and is unfit for use. Improper assembly could result in serious injury or death! Image B Image A Go back to Step 4 for instruction. - Page 18 STEP 9 Attach the Accessories Attach the Angle Tether (OPTIONAL) FIGURE 28 • The tether will come pre-assembled to the A-Frame. • Unfold the adjustable tether and clip it to the U-Bar on the underside of the Table Bed (Figure 28). •...
-
Page 19: Before Inverting
Attach the Owner’s Manual FIGURE 30 The Owner’s Manual contains important information on how to use your Teeter Hang Ups Inversion Table, including how to personalize the user settings, properly secure and release the Ankle Lock System, and test and adjust the rotation control. - Page 20 Any modification to this device will void the UL Listing. www.InversionInternational.com Tel. +49 511 62628630 U.S. and Foreign Patents Pending. Teeter Hang Ups is a registered trademark of Teeter. Specifications subject to change without notice. © COPYRIGHT 2014 Teeter. International Law Prohibits Any Copying. E61716 0314-0...