Any modification to this device will void the UL Listing. WARNING Read the Owner’s Manual thoroughly before using your Teeter Hang Ups Inversion Table. Improper settings could result in serious injury or death! If you have any problems assembling the equipment,...
RESULT IN SERIOUS INJURY OR DEATH. prevent tipping. In households with small children, the table should be stored flat on the floor, not upright. Figure 23 Teeter Hang Ups • NXT-R Teeter Hang Ups • NXT-R...
Before reading further, study the drawing below to familiarize yourself with the important components Insert the Main Shaft (NX-1600) into the of your new Teeter Hang Ups inversion table. Table Bed (NX-1300) • Ensure that the A-frame is fully open and locked at the Spreader Arms.
Page 5
(F5-1088) (Figure 2). Repeat with second bolt. Figure 2 Figure 13 Figure 14 (Turn Clockwise to Tighten the De-Rattler Function.) Teeter Hang Ups • NXT-R Teeter Hang Ups • NXT-R...
Page 6
(Figure 8). • Re-insert the bolts and secure with the Figure 8 nuts, tightening with the Allen Wrenches Figure 11 provided (IA-1149) (Figure 8A). Figure 8A Teeter Hang Ups • NXT-R Teeter Hang Ups • NXT-R...