Initializing The Dm1000 - Yamaha DM1000 Service Manual

INITIALIZING THE DM1000

You can delete all currently-recorded settings and
restore the factory-preset values, and reset the
Operation Lock password to its initial setting. Follow the
steps below.
Tip:
• If you want to keep the current internal data, be
sure to first back up the data using the included
Studio Manager software.
• You can also store the data to an external MIDI
device, such as a MIDI data filer, by using MIDI Bulk
Dump. (See page 146.)
1 Make sure that the power to the DM1000 is turned
off.
2 While holding down the SCENE MEMORY [STORE]
button, turn on the POWER ON/OFF switch.
After a moment, the DM1000 displays the following
confirmation window.
3 To reset the DM1000 to factory default settings,
move the cursor to the INITIALIZE button, then press
[ENTER].
To cancel the initialization operation, move the cursor
to the CANCEL button, then press [ENTER].
When the internal data is thoroughly overwritten, the
DM1000 restarts using the factory settings.
4 To reset the Operation Lock password to its initial
setting, in Step 2, move the cursor to the PASSWORD
button, then press [ENTER].
The password is reset to "1234".
If you do not take any action after the confirmation
window appears, the window automatically closes and
the DM1000 restarts without being initialized.
DM1000/MB1000/SP1000
145