Stp Sensor Adjustment - Suzuki VL800 Supplementary Service Manual

IAT SENSOR INSPECTION
The intake air temperature sensor is installed at the back side of
the air cleaner box. ($Page 61)
IAT SENSOR REMOVAL AND INSTALLATION
• Remove the air cleaner box. ($Page 103)
• Remove the IAT sensor from the air cleaner box.
• Install the IAT sensor in the reverse order of removal.
TO SENSOR INSPECTION
TO SENSOR REMOVAL AND INSTALLATION
The tip-over sensor is located in under the seat. ($Page 65)
• Remove the right frame cover. ($VL800K1 7-2)
• Remove the TO sensor from the frame.
• Install the TO sensor in the reverse order of removal.
NOTE:
When installing the TO sensor, the arrow mark must be pointed
upward.
STP SENSOR INSPECTION
STP SENSOR REMOVAL AND INSTALLATION
The secondary throttle position sensor is installed at the right
side of the No.2 (Front cylinder) throttle body ($Page 72).
• Remove the STP sensor. ($Page 106)
• Install the STP sensor in the reverse order of removal.

STP SENSOR ADJUSTMENT

• Adjust the STP sensor. ($Page 111)
HO2 SENSOR INSPECTION (E-02, 19, 24)
HO2 SENSOR REMOVAL AND INSTALLATION
The HO2 sensor is installed at the muffler.
• Remove the right frame cover. ($VL800K1 7-2)
• Disconnect the HO2 sensor lead wire coupler and remove the
HO2 sensor.
• Install the HO2 sensor in the reverse order of removal.
* HO2 sensor: 48.4 N·m (4.84 kgf-m, 35.0 lb-ft)
VL800K5 ('05-MODEL) 91