Configuring 802.1X Settings - AudioCodes MediaPack Series MP-11x User Manual

User's Manual
Parameter
Match Count
[AccessList_MatchCount]
12.2

Configuring 802.1x Settings

The 802.1x Settings page is used to configure IEEE 802.1X LAN security. The device can
function as an IEEE 802.1X supplicant. IEEE 802.1X is a standard for port-level security on
secure Ethernet switches; when a device is connected to a secure port, no traffic is allowed
until the identity of the device is authenticated.
The device supports the following Extensible Authentication Protocol (EAP) variants:

MD5-Challenge (EAP-MD5)

Protected EAP (PEAPv0 with EAP-MSCHAPv2)

EAP-TLS
For a description of the parameters appearing on this page, see 'Configuration Parameters
Reference' on page 461. For more information on this feature, refer to the Product
Reference Manual.

To configure the 802.1x parameters:
1. Open the 802.1x Settings page (Configuration tab > VoIP menu > Security submenu
> 802.1x Settings).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
Version 6.6
(Read-only) Displays the number of packets accepted or rejected by
the rule.
Figure 12-2: 8021x Settings Page
135
Description
12. Security
MP-11x & MP-124