Enabling The Heart Rate Monitor - Epson Runsense SF-710 User Manual

SF-710/510/310 User Manual

Enabling the heart rate monitor

When using the heart rate monitor, set HR to ON from
the Measure set. menu.
Operation buttons
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
"Specifying a GPS (GPS Positioning)" on
U
page 29
B
Displays the Measure set. menu.
Hold down B on the measurement screen.
C
Select HR.
Use C/D to select, and then press A.
Measuring Heart Rate (Heart Rate Monitor)
70
D
Select ON.
Use C/D to select, and then press A.
E
Set the heart rate zone you want to
maintain while exercising.
Use C/D to select, and then press A.
An alarm sounds if you are outside the set heart
rate zone.
Note:
❏ You can check or change the value set for the
heart rate in each heart rate zone in User
Settings.
"User Settings" on page 112
U
❏ To turn off functions that notify you with an
alarm, select OFF in Select Zone.
F
Check the set content.
Press A.
G
Complete the settings.
Hold down A.
The measurement screen is displayed.